• Pull each collapsed panel from its box.
• Unfold each collapsed panel while lining up the tubes from the top side onto the bottom side before unfolding completely.
• After the panels are unfolded and the tubes are inserted into the bottom half, take your hand and tap down on the top left and right corner to secure both halves together.
• Risers just slide onto the top of the panels.                                         
• Next take the clamps supplied and two of the panels making sure that the material side is facing each other on both panels and anchor them together by clamping one clamp towards the top and one towards the bottom and open the panels so they are free standing. (squeeze clamps firm)
• Now that the first two panels are free standing you can clamp the remainder of the panels together with ease.
• You can break the panels down in half after you use them for easy transport. (use original boxes) Storing them flat against a wall works best and takes up very little floor space.

5.	6.

From these pictures  you can actually see how easy it is to construct a barrier between yourself and ambient light.  The panels are light (10LB.ea,12LB. with riser) and easy to carry making set-up a snap.  Once you have the panels clamped together and in place, you can move and configure them anyway you want and enjoy the night sky.

Add our search bar to your site!

We'll keep you in the dark!

Home | Panel Observatories | Eyepiece Racks | Accessories | Dark Sky Pricing | Contact Dark Sky

2002-2008 © All rights reserved.

 Maintained by Dark Sky Inc.

Dark Sky Inc.
1-877-DarkSky

www.DarkSkypanels.com
DarkSkystuff@yahoo.com